If you’re looking for a small form factor ATX case, you’ve come to the right place. This article will show you some of the smallest ATX cases on the market, perfect for building a mini ITX or micro ATX gaming PC.
Whether you’re looking for a sleek and stylish case for your living room setup or something that can fit into a tight space in your office, one of these cases should be just what you’re looking for.
Cases for computers come in a wide range of sizes, from the smallest to the full tower. Cases take up space on your desk, so you might need to buy a bigger desk. A solution could be to find a small case that will work with an ATX motherboard. It will not only be a small case, but it will also support the ATX motherboard, which can be upgraded to support high-end hardware.
People sometimes want to build a cheap PC to play games or watch movies. Most of them don’t have much room in their rooms for a desk. One kind of motherboard used in gaming builds is ATX.
Most of the things you need for a media or gaming build are easy to find on Atx motherboards. However, you need a case that looks good, has a reasonable price and is made well enough to hold large cards and fans to keep the temperature down.
ATX, which stands for Advanced Technology eXtended, is a list of your motherboard’s specs that tells you how it is set up and what features it has. It also tells you how big your motherboard is, which helps you choose the size of your atx case.
Before you buy the best ATX case for your build, there are a lot of important things to think about. Important things include the ability to grow, the durability, the size, the airflow paths, the cooling system, the noise level, etc.
- Why Compact ATX Cases?
- What Size Will Be The Smallest PC Cabinet Case?
- Best Picked Smallest Case To Fit ATX Motherboard In 2025
- Conclusion
- FAQs
Why Compact ATX Cases?
The most significant advantage of going with a smaller form factor case is that it’s much easier to transport. If you’re taking your gaming PC to a party or a friend’s house, you won’t have trouble fitting it into a backpack or small car. If you’re worried about your components getting damaged in transit, most of these cases come with foam padding or other protective features to keep your hardware safe.
These cases take up minimal space on the desk. That can be a significant advantage if you’re working in a cramped office or don’t have much room for a giant tower in your living room. Since they’re smaller, they also tend to be lighter than full-size cases.
They tend to be cheaper than their full-size counterparts. Since there’s less material involved in constructing a smaller case, manufacturers can sell them for less money. This makes building a budget gaming PC much easier, as you won’t have to sacrifice quality parts to stay within your price range.
Another advantage of these compact cases is that they often come with unique features and design elements that you wouldn’t find on a more significant case. Many have tempered glass panels to show off your components, and some even come with built-in RGB lighting if you want your gaming PC to look as good as it performs.
Finally, some people prefer the look of a smaller case. A compact case is a way to go if you’re going for a sleek and minimalist aesthetic.
What Size Will Be The Smallest PC Cabinet Case?
Even compact atx cases come in various sizes, as each company tends to have specific dimensions. These dimensions are their unique selling point as they often market the size of their atx case as a critical feature.
The general measurement for an atx case is around 18.5″ x 8.3″ x 16.3″, but this can differ between companies. Some cases are even smaller than this, so it depends on what you’re looking for in size.
If you want the smallest possible atx case, you should shop around and compare different companies’ offerings before making your final decision. Some very compact atx cases on the market will save you a lot of space without sacrificing functionality or features.
One such example is LANCOOL 215, which has a size of 18.19 x 8.46 x 18.98 inches. It’s a great choice if you want a small atx case with plenty of room for all your components. The product has some great features, including RGB lights and unobstructed airflow.
It’s also worth noting that the price is very reasonable considering the quality of the case. Overall, LANCOOL 215 is a great option if you’re looking for a small atx case with plenty to offer in terms of features and performance.
Best Picked Smallest Case To Fit ATX Motherboard In 2025
| Case Name | Dimensions | Motherboard Support | GPU Clearance | Radiator Support | Price |
|---|---|---|---|---|---|
| Lian Li O11 AIR MINI | 18.19 x 8.46 x 18.98 | E-ATX, ATX, Micro-ATX, Mini-ITX | 315mm | 280mm | Check Price |
| Sliger Cerberus X | 14.96 x 6.77 x 14.09 | ATX, E-ATX, Mini-DTX, Mini-ITX | 330mm | 280mm | Check Price |
| Cooler Master Q500L | 15.2 x 9.1 x 15 | ATX, Micro-ATX, Mini-ITX | 360mm | 240mm | Check Price |
| RIOTORO CR1288 Full Tower | 22.4 x 9.6 x 20.9 | E-ATX, ATX, Micro-ATX, Mini-ITX | 360mm | 240mm | Check Price |
| Fractal Meshify 2 Compact | 16.69 x 8.27 x 18.7 | ATX, Micro-ATX, Mini-ITX | 413mm | 280mm | Check Price |
| Thermaltake Commander C34 | 18.3 x 8.9 x 18.9 | ATX, Micro-ATX, Mini-ITX | 310mm | 240mm | Check Price |
| Thermaltake G3 | 17.9 x 7.9 x 18.9 | E-ATX, ATX, Micro-ATX, Mini-ITX | 400mm | 240mm | Check Price |
| SILVERSTONE GD09B | 14.09 x 17.32 x 6.69 | SSI-CEB, ATX, Micro-ATX | 309mm | 240mm | Check Price |
| NZXT H510i | 16.85 x 8.27 x 18.11 | Mini-ITX, Micro-ATX, ATX | 381mm | 120, 280 | Check Price |
| Lian-Li Case O11D Mini | 25.2 x 25.2 x 7.6 | Mini-ITX, ATX, E-ATX | 395mm | Upto 360mm | Check Price |
| SFF Time – N-ATX | Upto 388 mm | Mini-ITX, Micro-ATX, ATX, Extended-ATX | 163mm | Upto 360mm | Check Price |
| Riotoro CR1080 – Mini Gaming Case | 15.75 x 14.1 x 9 | ATX, Micro-ATX, Mini-ITX | 300mm | 240mm | Check Price |
In this section, we are going to discuss our favorite compact cases. Our team of experts has shortlisted these cases, who take pride in their expertise and knowledge regarding the atx form factor. We are hopeful that one of these will match your requirements.
Our team has used these cases, reviewed them, and reached a point where they can confidently vouch for them. Rest assured, you can trust our judgment.
1- Lian Li O11 AIR MINI
The Lian Li O11 AIR MINI is an excellent option if you’re looking for a small atx case. It’s compatible with various motherboards, including E-atx/atx/m-atx/atx. The case also has good support for graphics cards, accommodating cards up to 315mm in length.
The CPU cooler height support is generous, meaning that you’ll be able to install a variety of coolers in this case. The interior chassis quality is excellent, with plenty of room for SSDs and HDDs. It support 6 x 2.5” SSD or 4 x 3.5” HDD + 2 x 2.5” SSD. The radiators and compatibility are also top-notch, with the case supporting 240mm and 280mm radiators.
The case comes with two fans pre-installed in the front and one rear fan. The fan cutouts are nicely sized, and there’s plenty of space for cable management. The air filters are easy to access and clean, and the installation process is relatively straightforward.
The case also has good support for power supplies and can accommodate PSUs up to 200mm in length. The side glass is of excellent quality, and it’s held in place with thumbscrews. The airflow in the case is very good, thanks to the well-designed airflow channels. It is german engineered, and the material used is aluminum.
The Lian Li O11 AIR MINI is an excellent choice if you’re looking for a small atx case. It offers good compatibility, support, and features while maintaining a compact size.
It also offers excellent value for money.
Key Features
- Tempered glass side panel
- Mid-Tower form factor
- E-ATX, ATX, MicroATX, and mini-ITX motherboard support
- GPU clearance up to 413mm
- Spacious and good for Water-Cooling
- Easy and intuitive cable management
- Only one screw for the side panel
- Easy customization with removable brackets and SSD mounts
- Built-in vertical GPU Mount bracket
- USB 3.1 Gen 2-compatible USB-C connector
2- Sliger Cerberus X
The Sliger Cerberus X is a great choice for anyone looking for a small form factor ATX case. It has good airflow. Its overall dimensions are 380mm x 172mm x 358mm (LxWxH).
It Supports ATX, EATX, Mini-DTX, and Mini-ITX motherboards. The Sliger Cerberus X has support for graphic cards up to a length of 330mm, which is great for most graphics cards on the market.
The Sliger Cerberus X also supports CPU coolers up to 160mm, which is great for most CPU coolers. The interior chassis quality of the Sliger Cerberus X is great, with metal panels and a well-designed layout that makes cable management easy. Overall, galvanized steel, aluminum, rubber feet, and tempered glass are used.
The Sliger Cerberus X supports both SSDs and HDDs, making it a versatile option for many users. It provides (2x) 2.5″ SSD/HDD mounting points on the base chassis, while you have plenty of opportunities for an upgrade.
The radiator supports and compatibility of the Sliger Cerberus X are decent, with a range of sizes that will fit most radiators on the market. Since it has liquid cooling, most users have never found a heating issue. It comes in two variants:
Single Radiator Options
- 1x 120/140mm radiator in the bottom or Front
- 1x 240/280mm radiator in the bottom
Dual Radiator Options
- 2x 120/140mm radiators in the bottom or bottom/front
- 1x 240/280mm radiator in bottom + 1x 120/140/240mm radiator in front
- 2x 240mm radiators in bottom/front
The Sliger Cerberus X comes with pre-installed fans, and it can install up to five fans in total. This gives users plenty of options when it comes to cooling their system. The cutouts for cable management in the Sliger Cerberus X are great, providing plenty of space to route cables cleanly and out of sight.
The air filters in the Sliger Cerberus X are also great, helping to keep dust from building up inside the case over time. The installation ease or difficulty of the Sliger Cerberus X is about average, with most users finding it easy to install their components into the case.
The power supply support in the Sliger Cerberus X is decent, with room for PSUs in all average lengths. It supports ATX as well as SFX. This gives users plenty of options for finding a PSU that fits their needs.
The side glass quality and material used in the Sliger Cerberus X are great, with tempered glass that provides a clear view into the inner workings of your system. Customers have an option to buy a model with a vented side that comes with honeycomb openings.
Airflow in the Sliger Cerberus X is excellent, with fan intakes on the front and top of the case that help keep your system running cool even under heavy load conditions. Overall The Sliger Cerberus X is a great option for users looking for a well-designed and feature-rich mid-tower case. It offers good support for most components on the market and has plenty of features that will appeal to even the most demanding users.
Key Features
- Tempered glass side panel
- Mid-Tower form factor
- E-ATX, ATX, MicroATX, and mini-ITX motherboard support
- GPU clearance up to 413mm
- Spacious and good for Water-Cooling
- Easy and intuitive cable management
- Only one screw for the side panel
- Easy customization with removable brackets and SSD mounts
- Built-in vertical GPU Mount bracket
- USB 3.1 Gen 2-compatible USB-C connector
3- Cooler Master Q500L
The Cooler Master Q500L is a mid-tower-sized computer case that offers excellent support for graphics cards, CPU coolers, and radiators. It also has good interior chassis quality and supports both SSDs and HDDs.
It has a fully perforated chassis and supports up to 5 fans in the bottom, rear, and front for excellent airflow. The site includes tempered glass for a clear view of the inner components. Thanks to the various cutouts provided, you can also use the case for cable management. The installation process is fairly easy, and all the necessary cutouts are present for good cable management.
The Cooler Master Q500L has dimensions of 15.2 x 9.1 x 15 inches. It supports all ATX, Micro ATX, and Mini ITX motherboards which is one of the reasons why we placed it on the list. It can support graphics cards up to 360mm in length if one uses a less than 160mm power supply.
The Cooler Master Q500L has a dust filter on the top and front of the case. The dust filter can be easily removed and cleaned. It uses magnets to attach to the case, which makes it very easy to remove for cleaning.
The interior of the Cooler Master Q500L is made from high-quality materials and is very well-built. It includes acrylic, which is why it is light weighted. One additional feature is the moveable I/O panel which is a nice addition.
It offers a moveable Power Supply Unit, which can be mounted at different locations providing extra space for the graphics card. The case can hold up to 4 2.5-inch HDDs. It has two 3.5-inch drive bays, which can be removed if not needed and can be replaced with two more 2.5-inch drives.
The case offers five dedicated slots for fans, while it comes with one 120 mm fan pre-installed on the rear side. The CPU cooler clearance is up to 160mm. Overall, the Cooler Master Q500L is a great mid-tower case that offers excellent value for money. It has good build quality, supports all ATX motherboards, and has good cable management options.
4- RIOTORO CR1288 Full Tower
The RIOTORO CR1288 full-tower gaming case is one of the best on the market. It has plenty of space for all your gaming gear and comes with a tempered glass side panel that shows your components in style. The case also has excellent airflow thanks to its mesh front panel and multiple fan mounts.
It is compatible with E-ATX, ATX, Micro ATX, and Mini ITX motherboards. The CR1288TG Prism is a full tower case with several features to help with cooling and organization. It has separate compartments for the motherboard, power supply, and drives to help direct airflow over the CPU, GPU, and motherboard and to isolate sensitive drive storage.
The extra-large, 140mm fans create powerful airflow circulation to keep your graphics cards, CPU, and power circuitry cool and protected. Up to 7x fans with support for 120.0 or 140.0 mm can be installed in the CR1288TG Prism for additional cooling. The integrated cable management is thoughtfully designed to provide optimal routing paths and tie-down points, allowing users to secure and conceal loose cables easily.
Toolless drive mounts make it a breeze to install hard drives and SSDs, while the top magnetic washable dust filter helps keep your computer clean. The top acrylic viewing window also contributes to showing off your build. All these features come together to create an excellent full tower case for cooling with easy organization, all at a great price!
5- Fractal Meshify 2 Compact
Fractal Meshify 2 Compact is a great choice for a high-quality, reliable, and affordable computer case. It offers good value for money, plenty of features, and great build quality.
The Fractal Meshify 2 Compact is a small but powerful case that can hold a full-sized graphics card and still have room for other components. It features a unique mesh design on the front and top panels, allowing airflow to keep your components cool.
The angular mesh front panel provides filtered airflow to keep your components cool, while the bold, stealth-inspired aesthetic gives your build a unique look. The case has a built-in power supply shroud to hide cables and wires and a windowed side panel so you can show off your build. Three integrated cable alignment clips and six velcro straps assist in more precise cable routing.
The case is compatible with ATX, MicroATX, and MiniITX motherboards, making it a great choice for many builds. The Fractal Meshify 2 Compact TG Dark Tint PC case features a sleek and subdued aesthetic that complements any build. Behind the tinted, tempered glass front panel.
For air-cooling enthusiasts, the Meshify 2 Compact TG Dark Tint offers ample space for installs with room for up to seven 120 mm fans or four 140 mm fans. TwoDynamic X2 GP-12 PWM fans are included in the box.
The I/O panel has been moved to the top of the chassis to offer easy access to your ports and buttons. The USB 3.1 Gen 2 Type-C port is perfect for connecting the latest high-speed external storage devices, while two additional USB 3.0 ports are also included.
This adaptable storage system supports either two 2.5″/3.5″ drives or up to four SSDs (two SSD brackets included). Overall it is 16.69 x 8.27 x 18.7 inches in dimension, Weighting only about 16 pounds, making it one of the lightest cases on the market.
The Meshify 2 Compact comes with a detachable front filter. The filter is easy to remove and clean, and it’s also dishwasher-safe. The entire front panel of the Meshify 2 Compact pops off, revealing the easily accessible dust filter.
6- Thermaltake Commander C34
The Thermaltake Commander C34 is a mid-tower case with a tempered glass side panel. It also comes with two 200mm 5V ARGB fans and one 120mm standard rear fan. It can support up to ATX MB. You can control the lighting with the ARGB controller. The case is black and has a matte finish.
The C34 is a mid-tower chassis that supports 2-way radiator mounting at the front and top. Users can easily customize their system’s cooling and enjoy silent operation with a built-in sound-damping material to minimize noise. Both locations support up to 360mm radiator for maximum cooling efficiency. It is compatible with ATX, Micro-ATX, and Mini-ITX motherboards.
The C34 TG ARGB is constructed with a durable tempered glass panel to showcase the inside of your rig. The 4mm thick tempered glass is more scratch resistant than traditional acrylic panels. The Commander C34 TG ARGB is equipped with a full-length power cover and PSU shroud to protect your components. The power cover conceals cable clutter and increases airflow to the motherboard tray area. The PSU shroud not only conceals cables but provides additional space for component placement or liquid cooling radiator installation.
Commander C Series offers support for two GPUs to be placed in multiple ways and dual PCI-E slots. The integrated riser GPU support bracket not only prevents the graphic card from sagging but also helps reduce the weight on the motherboard’s PCI-E slot.
The Commander C34 TG ARGB computer case is excellent for expandability and comes with a CPU cooler that can be up to 180mm tall, a VGA length of 310mm if you add a reservoir, and a power supply maximum length of 200mm. It’s easy to install and comes with a user manual.
It is designed to work with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards featuring a 5V addressable RGB header, allowing you to adjust the lights directly from the above software without installing any extra lighting software or controllers.
The 7+2 expansion slots provide room for multiple graphics cards, sound cards, or other expansion devices. The Commander C34 TG ARGB supports up to 3 x 3.5 “or 2.5″ (HDD Bracket); 2 x 2.5” (HDD Bracket)
Overall, the Thermaltake Commander C34 TG ARGB is a great computer case that offers value for money.
7- Thermaltake G3
Thermaltake has been a leader in computer chassis design and manufacturing for nearly two decades. The company’s chassis products are popular among PC enthusiasts and gamers for their excellent build quality, innovative features, and stylish designs. The Thermaltake G3 is another addition to the company’s lineup of gaming-themed cases.
The G3 is a mini-tower chassis that supports the latest EATX motherboard, CPU cooler up to 200mm tall, VGA card up to 400mm long, and 3 x 3.5″ / 2.5″ (with HDD cage)/ 5.25″ drive bays with tool-free installation. It features excellent cooling capability with support for up to 8 fans and outstanding expandability with the freedom to choose your components. The G3 is also equipped with I/O panel LED light indicators and an ergonomic carry handle for easy transport.
The Core G3 is designed for gamers who want to customize their gaming experience. The chassis can be adjusted for the best viewing while ensuring outstanding cooling performance. Users can display it on any surface of their choice, either vertically or horizontally.
The front-top panel has two USB 3.0 data transfer connections, two conventional USB 2.0 ports, an HD microphone, and headset jacks for easy access when required.
The Core G3 is a high-performance computer case that enables excellent cooling efficiency throughout the enclosure. It allows users to install up to a 240mm DIY liquid cooling radiator or a 240mm AIO liquid cooler while maintaining a long graphics card. Two 120mm turbo fans are pre-installed at the front for enhanced system ventilation. All intake ventilators have separate dust filters to keep the inside clean.
The Core G3, designed for high-performance gaming PCs, supports motherboards up to ATX size. It also includes a dual expansion slot VGA with a maximum height of 110mm and a CPU cooler with a maximum height of 110mm without a front fan. For even more gaming possibilities, the tool-free drive bay design enables users to simply install up to two 3.5″/2.5″ storage devices into the construction. As a result, installation is simple!
It has a PSU Clearance Limitation of 130mm, but it is tested for 4k VR gaming; rest assured, you won’t find any problem with this.
8- SILVERSTONE GD09B
The SilverStone GD09B is a great case for people who want the features of a large tower case but don’t have room for one.
This case is incredibly deep, allowing it to fit comfortably inside home theater cabinets and has plenty of space for expansion. It also includes quick access filters, which make cleaning your case much easier. The GD09B is a great choice for anyone who wants a high-quality case that won’t take up too much space.
The SilverStone GD09B is a mid-tower chassis that sports a clean internal layout with plenty of room to work. It has support for SSI-CEB, ATX, and micro-ATX motherboards. The drive cages have multi-purpose mounts that eliminate the need for adapters. There is also a positive air pressure design for excellent cooling/quietness and dust prevention. The front panel includes a USB Type-C port (SST-GD09B-C only).
This chassis has a depth of 358mm, which makes it ideal for those who want to use it in a home theater cabinet. It has a clean and modern look that would complement any setup. The build quality is excellent, and it comes with quick-access filters, which are always a welcome addition. If you’re looking for a mid-tower case that offers great value for the money, the SilverStone GD09B should be on your radar.
The plastic exterior with an aluminum finish and 0.8mm steel body complements its look. The aluminum finish gives the GD09B a modern look, and the plastic exterior helps keep costs down. The steel body is very sturdy and provides excellent protection for your components.
The cooling system has a fan on the back and one on the top. The side has two fans, one on the right and one on the left. The expansion slot is for seven cards. The power supply is standard PS2 (ATX).
The limitation of the CPU cooler is 138mm. The expansion card is compatible up to 12.2″ (309mm) long, with a width restriction-5.25″ (133mm). The VGA card supports graphics cards up to 13.6 inches. The PSU has a 170mm limitation.
The dimensions are 14.09 x 17.32 x 6.69 inches, weighing only 9 pounds. This makes it one of the lightest cases on the market. We recommend this case to anyone looking for a good mid-tower case that won’t break the bank. It offers great value for the money and should be able to fit most people’s needs. If you need a case with more features, there are other options available from SilverStone, but they will cost you more money.
9- NZXT H510i
The NZXT H510i is a sleek and modern PC case with numerous features to help you create a stunning build. The clean, minimalistic design is perfect for showing off your components, and the tempered-glass side panel provides an uninterrupted view of your build.
The H510i also has excellent cable management features to help keep your build looking clean and tidy. The NZXT H510i is a great option for a high-quality and stylish PC case.
The NZXT H510i has a built-in RGB LED strip and a mountable GPU bracket to give your case a touch of style. The USB 3.1 Gen2-compatible USB-C connector on the front panel provides easy access to your data, and the two Aer F120mm fans provide efficient cooling.
The case also has a removable dust filter to help keep your components clean. The removable bracket also allows for the installation of radiators up to 280mm, making the NZXT H510i a versatile and stylish PC case.
The overall dimensions of this small factor atx case are 16.85 x 8.27 x 18.11 inches, weighing 18 pounds. With no water cooler installed in the front, the GPU clearance is up to 381mm. With a water cooler installed in the front, it is still possible to clear 325mm. The CPU cooler height clearance is up to 165mm.
It can support the radiator on the front up to 280mm or on the rear up to 120mm. The drive bay support is 2.5″: 2+1 3.5″: 2+1.
It supports all Mini-ITX, Micro-ATX, and ATX motherboards. The I/O panel has 1 x USB 3.1 Gen 2 Type-C, 1 x USB 3.1 Gen 1 Type-A 1 x Headset Audio Jack. This case is available in black-and-white color schemes to choose from. You can also select from a wide range of accessories to customize your build, including RGB lighting kits, CPU coolers, GPUs, and more.
10- Lian-Li Case O11D Mini
The O11D MINI is part of the O11 Dynamic series, which blends traditional and modern aesthetics. The maximum number of water-cooling configurations may be accommodated by a case that isn’t overly large. With a modular back panel construction, the user can choose three slots/five slots/seven slots I/O shield to optimize the case to their desired configuration.
This case has magnetic dust filters on all three sides of the ventilation intakes and a removable tray to catch any dust that does manage to get in.
It supports motherboard sizes ranging from mini-ITX to ATX and E-ATX. And up to nine fans can cool the chassis. There are three fans 120mm on Top, Two 120mm or 2x 140mm on the sides.
There are 120mm or 2x 140mm on the bottom and one 120mm fan on the rear.
The top panel provides room for a 240/280/360mm radiator, and the base can accommodate a 240/280/360mm radiator. There is also the possibility of adding reservoirs and pumps to create a water-cooling system.
The O11D MINI has tempered glass panels on the front and sides. The power supply is hidden away in a PSU shroud. The cabling is kept tidy with multiple pass-through grommets and velcro straps. Two built-in controller hubs can control fan speed and lighting. The O11D MINI supports up to four SSDs or HDDs.
The 30mm space behind the side fan/radiator bracket is designed so that users can intake fresh air by mounting fans to directly cool the radiator, and it also leaves enough space for long GPUs in this compact case.
The recommended PSU is SFX/ SFX-L. Everything is in just a 25.2 x 25.2 x 7.6 inches case with a total weight of just 41 pounds if everything is included. This is a great case for those looking to do custom water cooling in a smaller form. The modularity of the back panel and the ability to add reservoirs/pumps makes this a great option for someone wanting to create a unique build. The all-black color scheme with tempered glass panels gives the case a modern and sleek look.
11- SFF Time – N-ATX
When we talk about the smallest ATX cases, SSF Time is one that you should check out. If you want a more portable case, you can even put this one in your backpack because it is so small.
At first glance, though, it looks like SFF Time only works with Mini-ITX or Micro-ATX motherboards. But this case is big enough to fit all form factor motherboards, including Mini-ITX, Micro-ATX, Micro-DTX, ATX, and Extended-ATX motherboards.
You can also use a Micro-ATX or ATX motherboard with a triple slot GPU. But if you choose an ITX motherboard, you can add a bigger card. But be careful. If you want to use a 360mm radiator for liquid cooling, it will take up some room on your GPU. Then you can only use a GPU with two slots.
As for features, the front has two USB 3.0 ports, three slots for 3.5-inch drives, and room for up to nine 2.5-inch drives.
The bad thing about this case is that it is hard to organize cables. You will have a hard time working with cables in this container because it is so small and there isn’t much room inside.
You shouldn’t expect to have a lot of options for how the air flows. Still, the default airflow setting works fine for most people.
12- Riotoro CR1080 – Mini Gaming Case
The Cooler Master Q500L is a mid-tower-sized computer case that offers excellent support for graphics cards, CPU coolers, and radiators. It also has good interior chassis quality and supports both SSDs and HDDs.
The Riotoro CR1080 is one of RIOTOTO’s small ATX cases. Full-size ATX motherboards, graphics cards, and power supplies can all be used with RIOTOTO.
To start with how well the Riotoro is made, the case is made of Alloy Steel. So, you can expect it to last for a long time. The length, width, and height of this chassis are 15.75″, 14.1″, and 9″. So, the small mid-tower case can be said to be.
The two separate compartments make cooling more effective and make it easier to put all the parts together.
This case has two 3.0 ports, a mic jack, and a headphone jack on the top, and seven slots on the back.
There is room for two power supplies in this case. The Riotoro logo makes the simple front look more beautiful.
The side panel lets you see what’s on the inside. This case can be cooled with water or extra fans, and it comes with one 120mm fan.
You can also make an AIO water cooling setup that supports up to 120/140mm on the back and 360mm on the top or front.
This case isn’t too heavy, so it’s easy to carry and move around. The building is made of aluminium and is a little bit thin. One of the mini atx cases on this list is this one.
Conclusion
These were our handpicked 10 compact cases that provide good airflow and support custom water cooling. All the cases are of different price points and form factors to suit everyone’s needs. We hope you found this list helpful in choosing the right case for your build.
FAQs
A new type of microATX motherboard was developed to be backward compatible with ATX. The mounting holes of microATX motherboards are derived from those on full-size ATX motherboards, and the I/O panel is identical. As a result, microATX motherboards can be installed in full-size ATX chassis.
Full-size ATX boards are ideal for users who like to overclock their video cards or processors because they can support more power. Additionally, switching out and installing components is easier on an ATX board because there is generally more room between labeled ports.
For optimal results, you should generally have up to 3 case fans for intaking cool air and two case fans to exhaust the heat. By doing this, you can replenish the cool air faster by removing the heat quicker. To be more effective, position the exhaust case fans closer to the CPU; otherwise, placing both as intakes will work fine. This needs to be noted that each case has its compatibility; you should check the manual of your case to make sure.
The Lian Li O11-Dynamic-Mini is the smallest case in that you can fit an ATX motherboard. This case is 25.2 x 25.2 x 7.6 inches and supports up to nine fans. It also has room for a 240/280/360mm radiator on the top and bottom panels.
I am a PC enthusiast with a passion for gaming and all things tech. With years of experience building and customizing PCs, I have become a go-to source for PC case reviews and gaming insights. I am dedicated to researching and writing about the latest trends and developments in the PC gaming industry, with a particular focus on PC cases. From budget-friendly options to high-end builds, I have the expertise to guide you through the process of selecting the perfect case for your needs. Whether you’re a beginner or a seasoned pro, my in-depth reviews and practical tips will help you make an informed decision.
